EP1100 Pro Series High Frequency Modified Sine Wave Inverter (1.2-2.4KVA)

High Frequency Modified Sine Wave Inverter

EP1100 Pro Series (1.2-2.4KVA)

Features

  • Rated power: 1.2KVA to 2.4KVA
  • Simulated sine wave inverter
  • Double layers PCB board
  • Configurable input voltage ranges(90-280VAC/170-280VAC) via LCD setting
  • Display accumulated working time
  • 3 steps charging algorithm
  • Auto restart while AC recovery
  • Overload & short-circuit protection, Battery reverse polarity protection, Deep discharge protection
  • Advanced technology optimizes battery life
  • Body with light strip and backlight display
  • Automatic line-to-battery switchover
  • 80cm Battery cables 12AWG*2

EP1100 Pro Series High Frequency Modified Sine Wave Inverter (1.2-2.4KVA)

Modified Sine Wave

  • Modified Sine Wave output

EP1100 Pro Series High Frequency Modified Sine Wave Inverter (1.2-2.4KVA)

AC Input

  • AC input Narrow Voltage : 170~280VAC, Wide Voltage:90~280VAC

EP1100 Pro Series High Frequency Modified Sine Wave Inverter (1.2-2.4KVA)

3-stage Charging Control

  • Connect to an alternate power source and the smart charger will top up your batteries and keep them happily on float

EP1100 Pro Series High Frequency Modified Sine Wave Inverter (1.2-2.4KVA)

Protection

  • Protection: overload, short circuit


ep11plus-1

LCD Display Information

1. FAULT LED
2. INVERTER MODE LED
3. MAINS MODE LED
4. LCD DISPLAY
5. POWER ON/OFF
6. SET KEY
7. UP AND DOWN KEY
8. ENTER KEY


ep11plus-2

Back Panel

1. DC Input Connector (Battery Terminal)
2. AC Input
3. AC Output Sockect(s)


Other Features

It is a cost effective, intelligent solar inverter which accept Solar & Utility input at the same time. The comprehensive LCD display offers user-configurable and easy-accessible button adjustment such as battery charging current, AC/solar charger priority and DC priority.When battery voltage low,it will automatically switch to AC grid to supply continuously power to the loads.

Inverter Connection

ep11plus-4

Package

ep11plus-3

Specification

MODEL EP11-1200 EP11-1800 EP11-2400
Default Battery System Voltage 12VDC 12VDC 24VDC
INVERTER OUTPUT
Rated Power 1200VA/720W 1800VA/1000W 2400VA/1440W
Waveform Modifided Sine-wave
Nominal Output Voltage RMS 230V
Output Voltage Regulation +10/-18%
Output Frequency 50Hz/60Hz +/-0.5 Hz
Inverter Efficiency(Peak) >80%
Line Mode Efficiency >95%
Power Factor 0.6
Typical Transfer Time Typical 15~20ms 40ms max
AC INPUT
Voltage 230VAC
Selectable Voltage Range—Narrow 170~280VAC
Selectable Voltage Range—Wide 90~280VAC
Frequency Range 50Hz/60Hz (Auto sensing)
BATTERY
Nominal Input Voltage 12VDC 24VDC
Minimum Start Voltage 10.5VDC 21.0VDC
Low Battery Alarm 10.5VDC+/-0.3V 21.0VDC+/-0.3V
Low Battery Cutoff 10.0VDC+/-0.3V 20.0VDC+/-0.3V
High Voltage Alarm 16.0VDC+/-0.3V 32.0VDC+/-0.3V
High Battery Voltage Recover 15.0VDC+/-0.3V 30.0VDC+/-0.3V
CHARGER
Charger Voltage (Vbat<12.5V) 14.4VDC+/-0.4V 28.8VDC+/-0.4V
Charger Voltage (Vbat>12.5V) 13.7VDC+/-0.2V 27.4VDC+/-0.2V
Charging Current 10A 10A±2A
Charging Current 20A 20A±2A
Overcharge Protection S.D. 16VDC ±0.4A 32VDC ±0.8A
BYPASS & PROTECTION
Nominal Input Frequency 50Hz or 60Hz
Overload Protection (SMPS Load) FUSE
Output Short Circuit Protection FUSE
Bypass Fuse Rating 10A
Max Bypass Current 10Amp
MECHANICAL SPECIFICATIONS
Dimensions (W*H*D) 253*267*90mm
Net Weight (kg) 2.3 2.5
Shipping Dimensions(W*H*D) 319*328*123mm
Shipping Weight (kg) 2.9 3.1
OTHER
Operation Temperature Range 0°C to 40°C
Audible Noise 60dB MAX
Display LED+LCD
Standard Warranty 1 year
Loading(20GP/40GP/40HQ) 1800pcs / 3600pcs / 4200pcs

Approximate Back-up Time Table

Power Rate(w) backup time(H) @1*100Ah backup time(H) @2*100Ah backup time(H) @4*100Ah backup time(H) @4*200Ah
720 1.4 2.8 5.6 11.2
1000 0.9 1.9 3.8 7.5
1400   1.4 2.8 5.6
Brochure: EP1100PRO.pdf Downloads
User Manual: 420-00255-01-EP1100-PRO.pdf Downloads